ReferenceU-6
Utilities Manual
10MAY01
runacl.exe
Description
RUNACL.exe is a program used to communicate between the PC and the control-
ler, similar to the Unix ssrun utility.
1) Find Runacl.exe in the Insight install directory, for example C:Insight20/
Utility/Runacl.exe
2) Double click on Runacl.exe to access the program and make sure the pause
light is not flashing on the FDM hardware.
3) The runacl program gives you seven different choices. Choose option T
(Terminal Emulator) only. Choosing another option could change the
settings in the controller and cause the FDM not to work correctly any-
more. Then you must choose which COM port you are sending through.
4) To exit out of this utility, press the end key, then Q to quit.
Windows NT Shell Scripts ssrecov
To Next Page
Loading...
