Stratus ftServer 2600 - General Servicing Information; CRU Handling and Storage

General Servicing Information 4-1
Chapter 4
General Servicing Information
4-
The following topics provide general servicing information:
• “Unpacking CRUs” on page 4-1
• “Storing CRUs” on page 4-2
• “Repacking CRUs” on page 4-3
• “Replacing a CRU” on page 4-3
• “General Safety Precautions” on page 4-4
See Chapter 5, “Installing and Replacing System Components” for detailed
information.
Unpacking CRUs
Upon receiving a CRU, perform the following:
• Inspect the packing slip to ensure that the correct CRU was received.
• Inspect the packing container for damage.
• Check the shipping impact indicators to ensure that they have not been activated
(see Figure 4-1).
If any of the following conditions apply to your shipment, see “Getting Help” in the
Preface.
• The package is damaged.
• An impact indicator has been activated.
• You received the wrong shipment.
If there are no problems, unpack the CRU.