Removing the Bezel
5-4
Stratus ftServer 2600, 4500, and 6300 Systems: Operation and Maintenance Guide
(R639)
Removing the Bezel
The system has a removable bezel that attaches to the front of both
CPU- I ⁄ O enclosures. See the following topics:
• “Removing the Bezel” on page 5-4
• “Replacing the Bezel” on page 5-5
Estimated time: One minute.
Tools: None.
Removing the Bezel
1. Grasp the bezel on its right and left sides.
2. Pull the bezel straight toward you until it snaps free from the ball studs (number 2
in Figure 5-1).
If you are replacing a defective bezel, set it aside for repacking. See “Repacking CRUs”
on page 4-3.
To Next Page
Loading...
