Initial Use of the Device
10
EN
4.2 Electromagnetic Compatibility
Protective measures Medical devices are subject to special precautionary measures concerning
electromagnetic compatibility (EMC). This device is to be used only for the
purposes described in the manual and has to be installed, set up, and operated in
compliance with the EMC notes and instructions.
4.2.1 Impact of Mobile and Portable HF Communication Devices
The emission of high frequency energy by mobile communication devices may
affect the function of the electrical medical device. Operating such devices (e.g.,
cell phones, GPS phones) in the proximity of the electrical medical device is
prohibited.
4.2.2 Electrical Connections
Do not touch electrical connections identified with this warning label. Do not
establish a connection between these plugs and sockets without first
implementing precautionary ESD (electrostatic discharge) measures.
Precautionary ESD measures The following are ESD precautionary measures:
• Apply potential equalization (PE) to all devices to be connected.
• Use only the listed equipment and accessories.
Employees have to be informed about and trained in ESD precautionary
measures.
To Next Page
Loading...
