Stryker FLUID SAFE - Device Combination Assembly Instructions

Initial Use of the Device
14
EN
4.7 Assembly of the Device Combination
The device combination FLUID SAFE Fluid Management System is divided for
shipment in 3 separate cartons.
Carton 1 (big) contains:
• Roller base
• Support plate with 2 Allen wrenches
• Container holder
•Washer
• Allen head screw M10
Carton 2 (long) contains:
• Pre-assembled stand system – composed of weighing unit, display unit, bag
holder and bag deflector.
• Manual for complete system
Carton 3 (small) contains:
• Pump unit
• Power cable
Unpack carton1 and carton 2.
Assemble the instrument parts in the same order as shown in Fig. 4-2, page 15 .
Fig. 4-1 Device combination
(1) Display unit FLUID SAFE Fluid
Management System
(2) Bag holder
(3) Bag deflector
(4) Pump unit FLUID SAFE Fluid
Management System
(5) Holding plate
(6) Scale pole
(7) Unit stand’s pole
(8) Container
(9) Weighing unit
(10) Roller base
(11) Locking foot brake
(12) Hooks for container holder
(13) Container holder
(14) Load controller
(1)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(2)
(10)
(11)
(12)
(14)
(13)