EasyManuals Logo

Stryker MX-PRO R3 User Manual

Stryker MX-PRO R3
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20 6082-209-001 REV A www.stryker.com
Return To Table of Contents
Cot Operations
WARNING
Always use all restraint straps to secure the patient on the cot. An
unrestrained patient may fall from the cot and be injured.
Always secure the patient on the cot with all the restraint straps. Buckle
the restraints across the patient’s chest/shoulders, waist and legs as
shown in Figure 6. Keep the restraint straps buckled when the cot is not
being used with a patient to avoid damage to the buckles and straps.
When attaching the restraint straps to the cot, keep in mind the
attachment points should provide strong anchorage and proper restraint
position while not interfering with equipment and accessories. Wrap
the strap around the cot frame and back through the loop on the end
of the strap as shown in Figures 7 and 8. The arrows indicate alternate
attachment areas.
Figure 7 - Back Rest Restraints
Figure 8 - Foot Section Restraints
Figure 6 - Safety Restraints
Figure 6 Safety Restraints
USING PATIENT RESTRAINT STRAPS

Table of Contents

Other manuals for Stryker MX-PRO R3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stryker MX-PRO R3 and is the answer not in the manual?

Stryker MX-PRO R3 Specifications

General IconGeneral
BrandStryker
ModelMX-PRO R3
CategoryMedical Equipment
LanguageEnglish

Related product manuals