22 6082-209-001 REV A www.stryker.com
Return To Table of Contents
Cot Operations
PEDI-MATE® INFANT RESTRAINT SYSTEM ATTACHMENT INSTRUCTIONS (OPTIONAL EQUIPMENT)
Refer to the Pedi-Mate® users manual for the manufacturer’s recommendations for the use, operation and care of the
Pedi-Mate® Infant Restraint System.
Securing the Pedi-Mate® to the cot:
1. Remove any restraints already attached to the cot.
2. Raise the cot backrest to the full upright position.
3. Position the Pedi-Mate® pad flat on the backrest with the black backrest straps out (see Figure 12).
4. Wrap the straps around the backrest and insert the ends of the straps through the brackets. Securely fasten the
buckle (see Figure 13).
WARNING
To avoid accidental release of the Pedi-Mate®, and possible injury to the infant, ensure the buckle is located away from
obstructions on the cot or head end storage pouch.
Figure 12 - Positioning the Pedi-Mate®
Figure 13 - Fastening the Pedi-Mate® Buckle
To Next Page
Loading...
Need help?
General
