Stryker MX-PRO R3 - Cot Features and Maintenance; Operating Cot Features

www.stryker.com 6082-209-001 REV A 33
Return To Table of Contents
ADJUSTING THE LEG REST
The leg rest is adjustable to allow for elevation of the patient’s legs.
To raise the leg rest, lift the leg rest frame (A) as high as possible. The support bracket will engage automatically.
Release the frame after the support bracket has engaged.
To lower the leg rest, lift the leg rest frame (A) and, while holding the frame, lift up on the release handle
(B) until the bracket disengages. Lower the leg rest until flat.
Cot Features
Figure 29 - Leg Rest Elevated
FOOT END
A
B