6 6082-209-001 REV A www.stryker.com
Return To Table of Contents
Introduction
This manual is designed to assist you with the operation and maintenance of the MX-PRO® R3 Ambulance Cot. Read
it thoroughly before using the equipment or beginning any maintenance on it.
SPECIFICATIONS
Maximum Cot Load Capacity 650 pounds 294,8 kg
Overall Length/Minimum Length/Width 80.5" / 62" / 23" 204,5 cm /
157,5 cm / 58,4 cm
Height
1
Position 1 13.5" 34,3 cm
See page 19 for positions. Position 2 21.0” 53,3 cm
Position 3 25.5” 64,8 cm
Position 4 29.0” 73,7 cm
Position 5 32.0” 81,3 cm
Position 6 35.0” 88,9 cm
Position 7 37.5” 95,3 cm
Weight
2
81 pounds 37,7 kg
Caster Diameter/Width 6" / 2" 15,2 cm / 5,1 cm
Backrest Articulation/Shock Position 2° to 73° / +14°
Minimum Operators Required for Loading/
Unloading an Occupied Cot
2
Recommended Fastener Systems Model 6370/6377/6378 Floor Mount Type
Model 6371 Wall Mount Type
Recommended Floor Height
3
Up to 32" 81,3 cm
Roll-In Style Yes
Single Wheel Lock / Double Wheel Lock Optional
1
Height measured from bottom of mattress at seat section to ground level.
2
Cot is weighed without mattress and restraints.
3
Cot may be loaded from any height and a height limiting kit (p/n 6060-202) is available to limit the load height of the cot.
Stryker reserves the right to change specifications without notice.
The MX-PRO is designed to conform to the Federal Specification the Star-of-Life Ambulance KKK-A-1822-F.
The yellow and black color scheme is a proprietary trademark of Stryker Corporation.
To Next Page
Loading...
