Stryker Neptune 2 Service Manual

0702-002-700 Rev-J EN
www.stryker.com 21
Appendix
To Use Facility Vacuum Source (cont’d)
1. Verify the rover is connected to facility power and the power switch is in the
ON position (see figure 14).
Figure 14 To Connect Facility Vacuum Source
2.Attach0.25inch[6.4mm]innerdiametersuctiontubingbetweenthefacility
vacuum source and the facility vacuum ports on the rover.
3. Apply and regulate the vacuum level provided to the rover from the facility
vacuum source regulator.

Stryker Neptune 2 Specifications

General

Brand	Stryker
Model	Neptune 2
Category	Medical Equipment
Language	English