TimeLine - User Manual
®
pg 21
HIGH PASS: Reduces the low frequency content of the wet signal
after the delay. A useful additional tone sculptor for
delays on low-note riffs or chords where you want to
reduce booming in your rig.
RISE TIME: Sets the time constant of the ramp input to the delay.
The display indicates the ramp time in seconds. Try
setting the ramp time to about the same value as the
delay time for natural swell effects.
A variable attack time delay that can swell into notes or chords. This
can create atmosphere and ambience in a subtle and stealthy manner.
SMEAR: Softens the attack of the repeats while maintaining
full frequency response. This allows for higher mix
levels while keeping the delay out of the way of the dry
signal. With high Repeats levels, the delayed signal
gets dreamy and ethereal.
OFF
|||||||||
0.10
0.15
0.20
0.25
0.30
0.40
0.50
0.60
0.70
0.80
0.90
1.00
1.10
1.20
1.30
1.40
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
120Hz
140Hz
160Hz
180Hz
200Hz
230Hz
260Hz
300Hz
350Hz
400Hz
500Hz
600Hz
700Hz
800Hz
900Hz
1.50
1.60
1.70
1.80
1.90
2.00
2.20
2.40
2.60
2.80
3.00
4.00
TIPS & TRICKS: Set the RISE param to match the delay time
for natural swell-meets-delay effects. Turn the MIX fully CW for
volume-pedal swell effects.
Delay Machines: Swell
PARAMETERS:
To Next Page
Loading...
