Delay Machines: Common Parameters
TAP DIVISION: Selects the subdivision to use for delay repeats when
tapping in a tempo. Tap division options include:
Quarter notes (default), Dotted Eighth notes, Eighth
notes, Triplets, Sixteenth notes.
NOTE: If TAPDIV is set to anything other than Quarter
notes, the TAP LED will blink in amber.
BOOST: +/- 3dB of boost/cut. This can be useful for level
matching in your effects chain, or can be used as an
effect such as boosting a solo with delay.
PERSIST: Turns on delay persist “trails” which will spill over
when the effect is bypassed. Use this if it is desired
for delay repeats to continue after the effect has been
bypassed. Note that if persist is set to ON, the bypass
mode will automatically be analog bypass.
All Delay Machines share a set of parameters. These parameters are
saved with each preset and include:
Continued on Next Page
To Next Page
Loading...
