Strymon TimeLine - Lo-Fi Delay

TimeLine - User Manual
®
pg 26
SAMPLE RATE: Selects the sample rate of the delay line, from 96
KHz all the way down to 750Hz. As the sample rate is
reduced, aliasing artifacts wreak havoc on the repeats.
REC / DUB PLAY
STOP
TYPE
REVERSE
FILTER
DUAL
DIGITAL
dBUCKET
PATTERN
dTAPE
BANK / TIME
hold (looper)
hold (save)
push (param)
ICE
TREM
DUCK
SWELL
®
LO-FI
VALUE
FILTER
GRIT SPEED DEPTH
B TAPA
TIME
REPEATS MIX
MOD
BANK DOWN BANK UP
hold (global)
750Hz
1 kHz
1.5 kHz
2 kHz
3 kHz
4 kHz
5 kHz
6 kHz
7 kHz
8 kHz
9 kHz
10 kHz
11 kHz
12 kHz
14 kHz
16 kHz
19 kHz
24 kHz
32 kHz
48 kHz
96 kHz
Allows creative destruction of your delay signal. Add filtering, vinyl
noise, low bit rate distortion, sample rate aliasing, etc.
BIT DEPTH: Reduces the digital bit depth from 32 bits down to 4
bits. Fuzzy crunchy artifacts are introduced as the bit
depth is reduced.
4 Bit
4.5 Bit
5 Bit
5.5 Bit
6 Bit
6.5 Bit
7 Bit
7.5 Bit
8 Bit
9 Bit
10 Bit
11 Bit
12 Bit
13 Bit
14 Bit
15 Bit
16 Bit
18 Bit
20 Bit
24 Bit
32 Bit
D | L
MIX: Mixes the lo-fi (bit and sample-rate dependent) signal
with the full resolution signal. Heinously corrupted
audio can sit on top of the full resolution signal, or go
full lo-fi mix for just the crud.
Delay Machines: Lo-Fi
PARAMETERS:
Continued on Next Page
VINYL: Our exclusive dVinyl technology introduces random
vinyl dust noise and scratches from a 33 1/3 rpm
record. The first half of the control (dynamic) adds
vinyl noise that only occurs with the repeats, while
the 2nd half of the control (static) adds full-time vinyl
noise for song intros, outros or bridges.
D ||| (dynamic)
S ||||| (static)