TimeLine - User Manual
®
pg 40
LOOPER MIDI CONTROL VIA MIDI NOTE #’S:
The looper can also be controlled with MIDI note
numbers.
Record note 0, velocity > 0
Play note 2, velocity > 0
Stop note 4, velocity > 0
Reverse (toggle) note 14, velocity > 0
Full/Half Speed (toggle) note 16, velocity > 0
Pre/Post (toggle) note 17, velocity > 0
Undo (to initial loop) note 7, velocity > 0
Redo note 9, velocity > 0
Reverse (absolute) note 103, velocity = 127
Forward (absolute) note 103, velocity = 0
Half Speed (absolute) note 104, velocity = 127
Full Speed (absolute) note 104, velocity = 0
MIDI CLOCK:
TimeLine will accept MIDI clock at the MIDI input and sync
delay time.
OTHER MIDI CC NUMBERS:
A footswitch 80 down=0 up=127
B footswitch 82 down=0 up=127
TAP footswitch 81 off=0 on=127
Remote TAP 93 any
Expression Pedal 100 0-127
Bypass 102 byp=0 eng=127
Phase Reset 125 any
MIDI Patch Bank 0 0-1
-Send a 0 value to access presets 00A - 63B.
-Send a 1 value to access presets 64A - 99A.
CC# VALUE RANGE
MIDI Specification Continued
To Next Page
Loading...
