Strymon TimeLine - Product Features and Technical Specifications; Key Features Overview; Technical Specifications

TimeLine - User Manual
®
pg 41
SPECIFICATIONS
Input Impedance 1Meg Ohm
Output Impedance 100 Ohm
Signal to Noise 115 dB typical
A/D & D/A 24-bit 96kHz
Frequency Response 20Hz to 20kHz
Max Input Level +8dBu
Bypass Switching True Bypass (electromechanical relay
switching) or Analog Buffered Bypass (with
selectable delay persist “trails”)
Dimensions 5” deep x 6.75” wide x 1.87” tall
POWER SUPPLY
Input Voltage 9VDC Center Negative
Required Current 300mA
FEATURES
• 12 hand crafted delay machine algorithms for meticulous and
nuanced delay sounds
• Ultra Low Noise, high performance A/D and D/A Converters
• Premium analog front end and output section
• Analog dry path for a zero latency dry signal that is never converted
to digital
• High Performance DSP
• 200 presets, selectable via encoder, MIDI or on the fly via footswitch
• Numerous deep edit parameters on all delay machines
• Full time 30 second looper available pre or post delay
• Stereo Input & Output
• Expression pedal input with selectable simultaneous control over
multiple knob parameters
• Feedback loop option for inserting an external effect into the delay
feedback
• +/- 3dB adjustable analog boost or cut configurable per preset
• Delay persist “trails” selectable per preset
• Full time Tap Tempo footswitch and external Tap footswitch available
via EXP input
• Rugged & Lightweight Anodized Aluminum Chassis
• Intuitive, performance friendly User Interface
• Global bypass selectable between True Bypass or Analog Buffered
Bypass on the fly via footswitch/MIDI