TimeLine - User Manual
®
pg 33
Global parameters affect TimeLine regardless of what preset is
currently active.
MS
TIME DISPLAY: Configures the display to show delay time in
Milliseconds or Beats Per Minute.
BPM
PRE
LOOPER LOCATION: Switches the Looper to be Pre or Post delay.
POST
|||||||
LOOPER LEVEL: Sets the volume level of the looper playback.
TRUE BYPASS
BYPASS SETUP: Changes the bypass mode between True Bypass and
Buffered Bypass. In True Bypass, electromechanical
relays are used to bypass TimeLine so that no
components are touching the input signal. In Buffered
Bypass the bypassed signal runs through a high quality
analog buffer.
BUFFERED BYPASS
PLAY
LOOPER EXIT: Determines if the looper stops when exiting or keeps
playing in the background.
STOP
Globals Menu
Continued on Next Page
CH 1 - 16
MIDI CHANNEL: Sets the MIDI Channel. Can be set to 1 - 16.
ON
MIDI CONTINUOUS CONTROLLERS: Turns MIDI CC messaging
(continuous controllers) ON or OFF.
OFF
To Next Page
Loading...
