TimeLine - User Manual
®
pg 39
LOOPER:
Record 87 any
Play 86 any
Stop 85 any
Reverse (toggle) 94 any
Full/Half Speeed (toggle) 95 any
Pre/Post (toggle) 96 any
Undo (to initial loop) 89 any
Redo 90 any
Looper Level 98 0-127
CC# Value Range
MIDI PATCH CHANGES:
Timeline presets are arranged in a grid of 100 numbered Banks (00-99)
with 2 presets (A and B) within each Bank for a total of 200 presets.
Because MIDI Program Change messages have a maximum number of
128 (0-127), the presets are grouped into 2 MIDI Patch Banks:
MIDI BANK 0 = PRESETS 00A-63B
MIDI BANK 1 = PRESETS 64A-99B
The presets are numbered sequentially within each bank:
PRESET 00A = MIDI program # 0
PRESET 00B = MIDI program # 1
PRESET 01A = MIDI program # 2
PRESET 01B = MIDI program # 3
PRESET 02A = MIDI program # 4 etc. up to #127...
TimeLine always powers up in MIDI Patch Bank 0, so if you plan to stay
within the first 127 presets (00A-63B), simply send a standard MIDI
Program Change message to load a preset.
If you will be using MIDI Bank 1, it is advisable to send a standard MIDI
Bank Change message [MIDI CC# 0 with a value equal to the MIDI
Bank #] before each MIDI Program Change.
MIDI Specification Continued
Continued on Next Page
ICE - Slice 46 0-2
ICE - Blend 25 0-20
DUCK - Sensitivity 37 0-17
DUCK - Release 55 0-20
DUCK - Feedback 54 0-1
To Next Page
Loading...
