TimeLine - User Manual
®
pg 23
TIPS & TRICKS: The SAW mode at higher LFO SPEED (3:1, 4:1, etc)
will create a high-impact ‘plectrum’ effect. RAMP mode at lower lfo
SPEED can create an interesting reverse envelope. Try SQUARE and
SINE at higher LFO SPEED for a traditionally-inspired new sound.
Experiment with the MIX control in conjunction with the DEPTH
parameter to dial in the intensity.
Delay Machines: Trem Continued
HIGH PASS: Reduces the low frequency content of the wet signal
after the delay. A useful additional tone sculptor for
delays on low-note riffs or chords where you want to
reduce booming in your rig.
OFF
20Hz
40Hz
60Hz
80Hz
100Hz
120Hz
140Hz
160Hz
180Hz
200Hz
230Hz
260Hz
300Hz
350Hz
400Hz
500Hz
600Hz
700Hz
800Hz
900Hz
To Next Page
Loading...
