TimeLine - User Manual
®
pg 7
OR
®
TRS
®
TRS
Connect a standard
TRS expression pedal
for continuous control
over any knob. To select
the knob(s) controlled
by the expression
pedal, use the EP SET
parameter in each
preset. All knobs
can be controlled
simultaneously. See
Common Parameters
for set up instructions.
Connect a Strymon
MiniSwitch to tap
tempo remotely. Use a
standard TRS cable to
connect the external
switch. Set the EXP MD
global setting to TAP to
use external tap.
EXP Connections
Connect a Strymon MultiSwitch for external bank selection, preset
selection, or extended control of TimeLine’s built-in looper. Set the
EXP MD global setting to either TAP, BANK, PRESET, or LOOPER.
Please refer to the MultiSwitch user manual for detailed setup
information:
www.strymon.net/support/multiswitch
To Next Page
Loading...
