Zelzah - Multidimentional Phaser
pg 14
Power Up Modes – Bypass Mode
Setting Zelzah to Buffered Bypass mode preserves the high frequency
response of your guitar signal through your pedal chain and long cable
runs.
Press and hold the ON (6-STAGE) footswitch while connecting
power to the pedal. Once both LEDs flash, release the footswitch.
Turn the SPEED (6-STAGE) knob to select True Bypass or Buffered
Bypass. The ON (6-STAGE) LED will change color to indicate the
current status as the knob is turned.
True Bypass: GREEN (default)
Buffered Bypass: RED
Press either footswitch to store the Bypass mode and begin
using Zelzah.
1
2
3
SWEEP
phase time
RESONANCE
SPEED
DEPTH DEPTH
VOICEMIX
SPEED
multidimensional phaser
classic
barber
env
o
mild
strong
NOTE: Bypass mode is persistent across power cycles and is not
saved per preset.
To Next Page
Loading...
