Strymon Zelzah - Live Edit Controls Quick Reference

Zelzah - Multidimentional Phaser
pg 40
POLARITY (4STAGE)
(See page 10 for an
illustrated description.)
STEREO SPREAD
(4STAGE)
(See page 8 for an
illustrated description.)
STEREO SPREAD
(6STAGE)
(See page 9 for an
illustrated description.)
SIGNAL ROUTING
(See page 7 for an
illustrated description.)
Turn DEPTH (6-STAGE) knob - status
shown on ON (6STAGE) LED
NEGATIVE: RED
POSITIVE: BLUE (default)
Turn DEPTH (4STAGE) knob - BOTH LEDs
change color from GREEN (narrow) to
AMBER (wide) as the control is adjusted.
Turn DEPTH (6STAGE) knob - BOTH LEDs
change color from GREEN (narrow) to
AMBER (wide) as the control is adjusted.
Turn VOICE knob - status shown on
ON (6STAGE) LED
Series: GREEN (default)
Parallel: BLUE
Split: RED
Live Edit Controls Quick Reference
Zelzah provides a way to adjust several settings that do not have a
dedicated knob or switch. Live Edit Functions are saved per preset.
Press and hold the ON (6STAGE) footswitch until BOTH LEDs blink
to enter Live Edit mode.
Release the footswitch and use the knobs as described below.
Press either footswitch to exit Live Edit mode.