Strymon Zelzah - Knobs and Switches - 4-Stage Phaser Controls

Zelzah - Multidimentional Phaser
pg 3
SWEEP
phase time
RESONANCE
SPEED
DEPTH
DEPTH
VOICE
MIX
SPEED
multidimensional phaser
classic
barber
env
o
mild
strong
Knobs and Switches - 4-Stage Phaser Controls
SPEED
Adjusts the LFO rate.
MIX
Adjusts the balance of the dry signal
and the phase-shifted signal from mild
phasing at min to 100% wet at max.
Strongest phasing effect occurs with knob
set at 12 o’clock (50/50 mix).
DEPTH
Adjusts the LFO range. A deeper phasing effect
is achieved as the knob is turned clockwise.
ON
Engages the 4-Stage phaser circuit,
independent of the 6-Stage phaser. RED ON
LED indicates that the 4-Stage phaser is
engaged. The LED pulses in time with the
selected SPEED when engaged.
SWEEP
Selects the style of the 4-Stage phaser.
classic: traditional rising and falling LFO* voicings that change in
character as the DEPTH knob is adjusted
barber: continuously rising or falling LFO. Direction is set via live
edit function (See page 10 for details.)
env: touch sensitive envelope phasing effect with range set by the
SPEED knob and sensitivity set by the DEPTH knob
NOTE: *An LFO is a low frequency oscillator. It is used to modulate
the filters that create the phasing effect.