Strymon Zelzah - Power Up Modes - EXP;MIDI Jack Configuration

Zelzah - Multidimentional Phaser
pg 15
Power Up Modes – Configuring the EXP/MIDI Jack
Set the functionality of the EXP/MIDI jack.
SWEEP
phase time
RESONANCE
SPEED
DEPTH DEPTH
VOICEMIX
SPEED
multidimensional phaser
classic
barber
env
o
mild
strong
Press and hold the ON (4-Stage) footswitch while powering up the
pedal. Once both LEDs flash, release the footswitch.
Turn the SPEED (6-STAGE) knob to select the function of the EXP/
MIDI jack. ON (6-STAGE) LED will change color to indicate the
current status as the knob is turned.
Expression Pedal mode: GREEN (default) - Allows continuous
control over any of the knobs in any direction with a standard TRS
expression pedal. (See page 17 for details.)
Favorite mode: AMBER - Allows you to recall a Favorite setting
using a Strymon MiniSwitch. (See page 19 for details.)
Tap mode: RED - Allows you to control the SPEED of the 6-Stage
phaser with TAP tempo using a Strymon MiniSwitch.
MIDI mode: BLUE - Allows for the selection of three presets
using a Strymon MultiSwitch Plus. Full MIDI functionality is
available by sending MIDI Program Change messages via 1/4”
MIDI connection using a Strymon Conduit or MIDI EXP cable. Up
to 300 presets are available via MIDI.
(See page 22 for MultiSwitch Plus or page 23 for MIDI.)
1
2