Strymon Zelzah - Page 18

Zelzah - Multidimentional Phaser
pg 18
External Control - Expression Pedal Setup (cont.)
Press either footswitch to exit and store the expression
pedal setup.
Set the knob(s) you would like to control to the desired settings for
the TOE position of the expression pedal. Only the ON (6STAGE)
LED will turn RED.
Now, rock the expression pedal to the TOE position. Now only the
ON (6STAGE) LED will blink GREEN.
8
7
6
NOTE: Expression pedal assignment is saved per Favorite setting
or preset.