Stulz CyberCool - Page 52

52
cybercool indoor chiller original instructions
EN/09.2017/G44 © STULZ GmbH – all rights reserved
Alarm message Cause for alarm Cause Elimination
Frost alarm Theantifreezethermostathas
triggered and the number of
allowed pump starts in the con-
text of frost protection manage-
ment has been exceeded.
Heatloadbyconsumertoolow. Determinetheheatloadofthe
consumer.
Water alarm Thewaterdetectorhas
triggered.
Waterinthedetectorarea(e.g.rai-
sed floor).
Determinetheoriginofwater.
Sealleakage.
# stands for a number in case of several components of the same kind.