Stulz CyberCool - Page 57

57 © STULZ GmbH – all rights reserved EN/09.2017/G44
cybercool indoor chiller original instructions
Positioning of the chiller on the floor stand
Whenpositioningthechillerontheoorstand,itmustbebroughtpreciselyintothecorrectpositionabovethe
floor stand from the front (under no circumstances diagonally).
•usemountingaidstobringintheunitand
secure these by fixing belts at the unit.
•layatleasttwosecuringinstruments(e.g.
square steel bars) on the stand to avoid a
slip-off.
•whentheunitisintherightpositiontakeaway
the securing aids and set down the unit.
•nowpullawaythemountingaidsunderthe
unit.
Mounting aid