57
June 2013
Electrical Systems Operation & Diagnosis Module (602)
Registration Successful
Follow the instructions on the screen until the
Immobilizer main menu is displayed.
Failed Screen
Failure to change keys within 30 seconds results
in the registration of one key only. Perform
the Immobilizer registration process from the
beginning to register all keys.
Previously Registered Key
This information is displayed after attempting to
register a previously registered key.
Failed Unregistered Key
This information will be displayed if an
unregistered key is being used to begin the
Immobilizer registration process. Remove that
key and replace the key with one that is already
registered.
87
88
89
90
To Next Page
Loading...
