67
June 2013
Electrical Systems Operation & Diagnosis Module (602)
Security System
The security system for the 2005 and newer
Legacy vehicles is controlled by the BIU. The
security system and its chosen operating
characteristics must be set and adjusted with
the SSMIII.
The following select monitor displays briefly
introduce the items to be set and adjusted.
Security System
Alarm Delay Setup
Alarm Delay Setup-The Alarm System is
activated by the keyless entry transmitter.
The Alarm system can be adjusted to arm
immediately or enter a 30 second delay. This
is accomplished using the “Alarm delay Setup”.
During the 30 second delay the security light will
flash at 5 Hz and change to a 1 Hz flash when
the system is armed.
Passive Mode
Passive mode-The Alarm system is activated by
exiting the vehicle. The Alarm system will arm
60 seconds after all doors are closed. This time
cannot be adjusted.
121
122
123
To Next Page
Loading...
