68
June 2013
Electrical Systems Operation & Diagnosis Module (602)
Answer-Back Buzzer Setup
Hazard Answer-Back Setup
The Buzzer Beeping setup and the Hazard Light
answer back can be programmed to respond or
not to respond to the arming or disarming of the
Alarm system.
Impact Sensor
The impact sensor must be turned ON and the
sensitivity adjusted.
Impact Sensor Setup
Sensitivity is adjustable on a scale of 1 to 10 with
5 being the setting from the factory.
The smaller number is, the more sensitive the
sensor becomes.
Lockout Prevention
Lock out prevention is also adjustable. This
prevents the vehicle from being locked while the
keys are in the ignition.
This functions when using the lock button to lock
the vehicle only.
124
125
126
127
128
To Next Page
Loading...
