97
June 2013
Electrical Systems Operation & Diagnosis Module (602)
PRG Auto Closer Parked
During normal operation with the PRG closed, the arm of the sector switch is resting on the white
plastic detent of the latch assembly driven gear (Sector gear). This represents an off or closed
position for the PRG control unit. 5 volts will be present at the PRG control unit on the sector
switch terminal.
At the same time, the courtesy and latch switch assembly is in the off or closed position. Five (5)
volts will be present at the latch switch terminal of the PRG control unit and 12 volts will be present
at the courtesy switch terminal.
Courtesy and Latch Switch Assembly and Sector Switch
NOTES:
202