Black plate (165,1)
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
& Journey time
S03AG05
The journey time shows the time that has
elapsed since the ignition switch was
turned to the “START” position.
The journey time indication flashes each
time a complete hour has elapsed. If the
display is giving an indication other than
the journey time, the display switches to
the journey time, flashes for five seconds,
and returns to its original indication each
time a complete hour has elapsed.
NOTE
The journey time is reset when the
ignition switch is turned to the
“LOCK”
position. It is also reset if the ignition
switch is turned to the “LOCK” or
“Acc” position prior to restarting of
the engine.
Light control switch
S03AH
WARNING
To prevent battery discharge result-
ing from accidentally leaving your
lights on when your vehicle is
parked, the light switch operates
only when the ignition switch is in
the “ON” position. In any other
position, the vehicle’s lights will be
out.
If you park your vehicle on a road-
side at night, use the hazard warn-
ing flasher to alert the other drivers.
The light switch operates only when the
ignition switch is in the “ON” position.
Instruments and controls 3-45
– CONTINUED –
3
To Next Page
Loading...
