Subaru Outback 2006 User Manual

Black plate (167,1)
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
& Daytime running light system
S03AH04
WARNING
The brightness of the illumination of
the
high beam headlights is reduced
by the daytime running light system.
The light switch must always be
turned to the “
” position when it
is dark outside.
The front side marker lights, parking lights
and license plate lights will automatically
come on and the
high beam headlights
will automatically come on at reduced
brightness when the engine has started,
under the following conditions:
. The parking brake is fully released.
. The light switch is in the “OFF” or “
”
position.
Turn signal lever
S03AI
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will
return automatically to the neutral position
when you release it.
Illumination brightness con-
trol
S03AJ
The brightness of clock display, audio, air
conditioner, information display and instru-
ment panel illumination dims when the
light switch is in the “
” or “ ”
positions. You can adjust brightness of
the instrument panel illumination for better
visibility.
For turbo and 3.0-liter models, you can
also adjust the brightness of the instru-
ment panel illumination when the lighting
switch is in the OFF position.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
Instruments and controls 3-47
– CONTINUED –
3

Subaru Outback 2006 Specifications

General

Brand	Subaru
Model	Outback 2006
Category	Automobile
Language	English