Black plate (373,1)
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
Drive belts
S11AI
The alternator, power steering pump, and
air conditioner co mpressor depend on
drive belts. Satisfactory performance re-
quires that belt tension be correct.
& 2.5-liter models
S11AI01
1) Power steering pump pulley
2) Air conditioner compressor pulley
3) Crank pulley
in (mm)
Deflection
New belt
Used belt
A
0.28 – 0.35
(7.0 – 9.0)
0.35 – 0.43
(9.0 – 11.0)
B
0.30 – 0.33
(7.5 – 8.5)
0.35 – 0.40
(9.0 – 10.0)
To check belt tension, place a straight-
edge (ruler) across two adjacent pulleys
and apply a force of 22 lbs (98 N, 10 kg)
midway between the pulleys by using a
spring scale. Belt deflection should be the
amount specified.
& 3.0-liter models
S11AI02
It is unnecessary to check belt tension
periodically because your engine is
equipped with an automatic belt tension
adjuster. However, replacement of the belt
should be done according to the main-
tenance schedule in the "Warranty and
Maintenance Booklet". Consult your
SUBARU dealer for replacement.
If a belt is loose, cracked, or worn, contact
your SUBARU dealer.
Manual transmission oil
S11AJ
& Checking the oil level
S11AJ01
5-speed transmission (Non-turbo models)
1) Yellow handle
Maintenance and service
11-21
– CONTINUED –
11
To Next Page
Loading...
