EasyManua.ls Logo

Subaru Outback 2006 - Recommended Grade and Viscosity

Subaru Outback 2006
438 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (379,1)
Model "A2440BE-A" EDITED: 2006/ 12/ 6
Others
1) Filler plug
2) Drain plug
Others
1) Filler hole
2) Drain hole
3) Oil level
Remove the plug from the filler hole and
check the oil level. The oil level should be
kept even with the bottom of the filler hole.
If the oil level is below the bottom edge of
the hole, add oil through the filler hole to
raise the level.
CAUTION
. Be careful not to spill rear differ-
ential gear oil when adding it. If
rear differential gear oil touches
the exhaust pipe, it may cause a
bad smell, smoke, and/or a fire. If
rear differential gear oil gets on
the exhaust pipe, be sure to wipe
it off.
. If the vehicle requires frequent
refilling, there may be an oil leak.
If you suspect a problem, have
the v ehicle checked at your
SUBARU dealer.
& Recommended grade and
viscosity
S11AM02
Each oil manufacturer has its own base
oils and additives. Never use different
brands together.
Oil grade:
API classification GL-5
Maintenance and service
11-27
CONTINUED
11

Table of Contents

Related product manuals