Black plate (47,1)
北米Model "A2440BE-A" EDITED: 2006/ 12/ 6
4. After fastening the seatbelt, make sure
that the “
” mark on the con nector
(tongue) and the “
” mark on the buckle
face outwards.
5. Insert the center seatbelt tongue plate
into the center seatbelt buckle marked
“CENTER” on the left-hand side until it
clicks.
6. To make the lap part tight, pull up on
the shoulder belt. And place the lap belt as
low as possible on your hips, not on your
waist.
! Unfastening the seatbelt
S01AE060301
Push the release button of the center
seatbelt buckle (on the left-hand side) to
unfasten the seatbelt.
Seat, seatbelt and SRS airbags 1-21
– CONTINUED –
1
To Next Page
Loading...
