INSTRUCTIONS MANUAL
-93-
FIG. 18
7) then the following screen is displayed:
8) Type the filter code and press OK to delete the alarm. If the filter code is not available,
call the Service Center:
9) Remove the dryer filter, use the special wrench (ref Fig.18)
10) press OK to continue:
Remove the drier filter
Use the special wrench
and press OK
Unscrew
Recovering gas from filter…
R134a MAINTENANCE
CHANGE DRYER FILTER
Reset service alarm
Enter filter code
R134a MAINTENANCE
CHANGE DRYER FILTER
R134a MAINTENANCE
CHANGE DRYER FILTER
To Next Page
Loading...