INSTRUCTIONS MANUAL
-94-
FIG. 19
11) Take the new filter, wet with clean POE oil both o-rings, and verify that they are correctly
placed into their seats, press OK:
12) Insert the new dryer filter, use the special wrench (ref Fig.19),
13) and press OK:
14) Press OK to continue with vacuum check:
Continue with vacuum and
check for leaks.
Press OK
Verify that both o-rings are correctly placed into their seats
R134a MAINTENANCE
CHANGE DRYER FILTER
Insert new drier filter
Use the special wrench
And press OK
R134a MAINTENANCE
CHANGE DRYER FILTER
Screw
R134a MAINTENANCE
CHANGE DRYER FILTER
To Next Page
Loading...