Chapter 5 Using and Servicing Internal Storage Devices 121
2. Use an antistatic mat or similar surface.
When performing any option installation or service procedure, place static-sensitive
parts, such as disk drives, on an antistatic surface. The following items can be used
as an antistatic surface:
■ The bag used to wrap a Sun replacement part
■ The shipping container used to package a Sun replacement part
■ Sun electrostatic discharge (ESD) mat (part number 250-1088, available through
your Sun sales representative)
■ Disposable ESD mat, shipped with replacement parts or options
3. Use an antistatic wrist strap.
Attach the appropriate end to the system chassis sheet metal and attach the other
end of the strap to your wrist. Refer to the instructions that come with the strap.
4. Detach both ends of the strap after you have completed the installation or service
procedure.
To Next Page
Loading...
