152 Sun Fire 280R Server Owner’s Guide • January 2001
How to Remove a Tape Cartridge
Before You Begin
Note – The information in this section applies to a DDS-4 tape drive. If you have a
different type of tape drive installed, see the specifications shipped with the drive
for information.
What to Do
1. Check that there is no drive activity.
The green activity LED should be unlit. A flashing LED indicates drive activity.
Caution – Do not eject the tape cartridge when the drive is active, or you may incur
data loss or equipment damage.
2. Push the Eject button and remove the tape cartridge.
Activity LED Attention LED Eject button
To Next Page
Loading...
