Chapter 2 System Setup 29
8. Connect the external cables to the back panel of the system.
As you connect each cable, check it for information indicating the cable’s origin and
its terminating connection. If you are installing the server for the first time, see the
“About Communicating With the System” on page 33 for information about
communicating with the server.
9. Retract the cabinet’s anti-tip legs (if necessary).
10. Reattach, close, and lock the rack door(s) as appropriate.
What Next
To power on the system, see:
■ “How to Power On the System” on page 40
To Next Page
Loading...
