Sun Microsystems SUN FIRE 280R User Manual

126 Sun Fire 280R Server Owner’s Guide • January 2001
4. Align the disk drive to its drive bay.
Orient the drive so that the drive handle’s hinge faces the outside of the drive bay.
Note – If you are replacing a drive that you removed previously, be sure to install
the drive in the same drive bay from which it was removed.
5. Holding the drive by its handle, fit the drive into the drive bay guide rails.
6. Slide the drive into the bay until it barely contacts the backplane.
Disk drive handle

Sun Microsystems SUN FIRE 280R Specifications

General

Brand	Sun Microsystems
Model	SUN FIRE 280R
Category	Server
Language	English