Sun Microsystems SUN FIRE 280R User Manual

62 Sun Fire 280R Server Owner’s Guide • January 2001
5. Turn the keyswitch on the front panel of the system to the Off position.
Insert the system key into the keyswitch. See “Keyswitch Settings” on page 9 for
information about each keyswitch setting.
Note – Standby current (5 V DC) is still present in the system. To remove all current
from the system, remove both AC cables from their back panel receptacles.
6. Remove the key from the keyswitch, and keep it in a secure place.
Off position

Sun Microsystems SUN FIRE 280R Specifications

General

Brand	Sun Microsystems
Model	SUN FIRE 280R
Category	Server
Language	English