EasyManua.ls Logo

Sun Microsystems Sun Fire T1000 - Exercising the System Using Sunvts Software

Sun Microsystems Sun Fire T1000
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-50 Sun Fire T1000 Server Service Manual January 2007
If SunVTS software is not installed, you see an error message for each missing
package.
The following table lists the SunVTS packages:
If SunVTS is not installed, you can obtain the installation packages from the
following places:
Solaris Operating System DVDs
Sun Download Center: http://www.sun.com/oem/products/vts
The SunVTS 6.1 software, and future compatible versions, are supported on the
server.
SunVTS installation instructions are described in the SunVTS Users Guide.
3.8.2 Exercising the System Using SunVTS Software
Before you begin, the Solaris OS must be running. You also need to ensure that
SunVTS validation test software is installed on your system. See Section 3.8.1,
“Checking Whether SunVTS Software Is Installed” on page 3-49.
The SunVTS installation process requires that you specify one of two security
schemes to use when running SunVTS. The security scheme you choose must be
properly configured in the Solaris OS for you to run SunVTS. For details, refer to the
SunVTS Users Guide.
SunVTS software features both character-based and graphics-based interfaces. This
procedure assumes that you are using the graphical user interface (GUI) on a system
running the Common Desktop Environment (CDE). For more information about the
character-based SunVTS TTY interface, and specifically for instructions on accessing
it by tip or telnet commands, refer to the SunVTS Users Guide.
ERROR: information for "SUNWvts" was not found
ERROR: information for "SUNWvtsr" was not found
...
Package Description
SUNWvts SunVTS framework
SUNWvtsr SunVTS framework (root)
SUNWvtsts SunVTS for tests
SUNWvtsmn SunVTS man pages

Table of Contents

Related product manuals