16 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
Copy the Drivers Floppy Image File
Use this procedure if you choose the Floppy Image method to install the mass storage
drivers.
Ensure that a JavaRConsole system is available to host the driver files. This system
must have access to the windows.zip driver package downloaded from the driver
download site or on the Tools and Drivers CD/DVD (system software release 2.1, or
later) as shown in “Download Server-Specific Driver Packages” on page 7.
▼ To Copy the Drivers Floppy Image File
To copy the floppy image file using a Windows system:
1. If you have downloaded windows.zip from the download site, skip to Step 2.
If you are using the Tools and Drivers CD/DVD to access the floppy package,
do the following:
a. Insert the CD into the JavaRConsole system.
b. Navigate to the appropriate directory (depending on the RAID controller in
your server, Sun StorageTek or LSI):
drivers/windows/RAID/LSI/floppy
–or–
drivers/windows/RAID/StorageTEK/floppy/2003
and then proceed to Step 3.
2. If you have downloaded windows.zip from the download site, do the
following to copy and extract the files:
a. Copy the windows.zip file to a temporary directory.
b. Start Windows Explorer.
c. Navigate to the temporary folder where you placed the downloaded file.
d. Select windows.zip.
e. On the File menu, click Extract All.
To Next Page
Loading...
