78 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
b. Comment out the dll files in the [Files.scsi.RAIDClASS] and
[Files.scsi.BUSDRV] sections by adding a semicolon at the beginning of
each line.
c. Save the changes and exit the file.
9. Stop and start the Remote Installation Service (BINLSVC) on the RIS server by
entering the following at a command prompt:
net Stop binlsvc
net Start binlsvc
10. Install the image onto your Sun Fire server.
Installing Windows Server 2003 64-bit Version
Using RIS
Perform the following task to create a Windows Server 2003 64-bit RIS image for
your server.
Note – All examples below are for a Sun Fire X4150 server with version 2.1.0 of the
Tools and Drivers CD/DVD. For the Sun Fire X4250 and X4450, the same
instructions apply, but file paths on the Tools and Drivers CD/DVD may differ.
▼ To Install Windows Server 2003 64-bit Using RIS
1. Install RIS support on a Windows Server 2003 system. For a complete set of
instructions on how to install the RIS on Windows Server 2003 go to
http://support.microsoft.com/default.aspx?scid=kb;en-
us;325862.
2. Install Windows Server 2003 SP1 64-bit on the RIS server:
a. Insert Windows Server 2003 SP1 64-bit CD into the RIS server CD/DVD
drive.
b. Type risetup.exe in the Run field.
The Welcome to the Remote Installation Services Setup Wizard screen
appears.
c. Click Next.
To Next Page
Loading...
