23
CHAPTER
5
Configure the JavaRConsole System
This chapter describes how to set up the JavaRConsole system to deliver the mass
storage drivers and Windows Server 2003 or Windows Server 2008 media for
operating system installation. If you do not plan on installing Windows from a
remote system, you can skip this chapter.
Note – If you have chosen both the Floppy Disk Local (only required for Windows
Server 2003 installations) and Windows Local delivery methods in Chapter 3, proceed
to Chapter 6.
■ You will need to set up a JavaRConsole system if you have chosen any one of the
following mass storage driver or Windows Server 2003 or Windows Server 2008
media delivery methods described in Chapter 3:
■ Floppy Disk Remote
■ Floppy Image (Only available for server modules supporting ILOM. This
method can not be used for server modules using ELOM.)
■ Windows Remote
■ Windows Image
Note – This procedure does not provide detailed instructions for setting up the
JavaRConsole hardware. For Sun servers with ILOM, see the Integrated Lights Out
Manager (ILOM) Administration Guide for further information. For Sun servers with
ELOM, see the Embedded Lights Out Manager Administration Guide for further
information. Note that there are multiple versions of LOM, be sure to refer to the
guide that matches your server’s installed version.
To Next Page
Loading...
