Chapter 9 Incorporate Sun Fire Drivers Into a WIM or RIS Image 73
Installing Windows Server 2003 32-bit Version
Using RIS
Perform the following task to create a Windows Server 2003 32-bit RIS image for
your server.
Note – All examples below are for a Sun Fire X4150 server with version 2.1.0 of the
Tools and Drivers CD/DVD. For the Sun Fire X4250 and X4450, the same
instructions apply, but file paths on the Tools and Drivers CD/DVD may differ.
▼ To Install Windows Server 2003 32-bit Using RIS
1. Install RIS support on a Windows Server 2003 system. For a complete set of
instructions on how to install RIS on Windows Server 2003 go to:
http://support.microsoft.com/default.aspx?scid=kb;en-us;325862
2. Install Windows Server 2003 SP1 32-bit on the RIS server by doing the
following:
a. Insert Windows Server 2003 SP1 32-bit CD into the RIS server CD/DVD
drive.
b. From the Start menu choose Run.
c. Type risetup.exe in the Run field.
The Welcome to the Remote Installation Services Setup Wizard screen appears.
d. Click Next.
e. Select Add a new OS image to this remote installation server, and then click
Next.
f. Select the drive location that has the Windows 2003 SP1 32-bit CD in it, and
then click Next.
g. Type a descriptive name for the stored Windows 2003 SP1 32-bit CD, and
then click Next.
For example: X4150_Windows_2003_SP1_32bit
h. Type a description and Help text for the end user, and then click Next to
continue.
i. Select Use the old client installation screens, and then click Next.
j. Review the settings, and then click Finish to install the image.
To Next Page
Loading...
