65
CHAPTER
9
Incorporate Sun Fire Drivers Into a
WIM or RIS Image
This chapter is intended for advanced system administrators who need to
incorporate the server-specific drivers into a Windows Imaging Format (WIM) image
or a Remote Installation Service (RIS) image.
WIM files are installed using Windows Deployment Services (WDS). RIS images can
be deployed using either WDS in legacy mode or RIS.
This chapter is not a tutorial on WDS or RIS; it provides guidance on how to
incorporate the server-specific drivers into a WIM or RIS image. This chapter
contains the following sections:
■ “Determine Required Drivers” on page 66
■ “Add Drivers to a WIM Image” on page 66
■ “Add Drivers to a RIS Image” on page 72
■ “Installing the RIS Image on a Client System” on page 82
To Next Page
Loading...
