20 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
4. Copy the 2003REBURN_version.zip file to the temporary folder you created
previously.
Where version is the current version of the reburn script package.
5. Right-click on the 2003REBURN_version.zip file and select Extract All.
Extract the files to the current folder.
6. Click Start from the Windows taskbar, and then click Run.
7. Enter the following command to run the reburn.bat file from the temporary
folder:
c:\reburn\2003Reburn.bat
8. Follow the prompts to create the file set needed for a Windows Server 2003
media CD with all the required mass storage drivers.
You will be prompted for the location of the bootimg.ima file (located in c:\
reburn_image\bootimg.ima) and other information that will be needed for
creation of an ISO image.
9. Use CD-burning software to create an ISO image using the c:\
reburn_image\bootimg.ima file as the source.
Note – The windows reburn script DOES NOT generate the ISO image. This is
because there is no native support in Windows XP or 2003 for burning CD-ROMS.
You will need to obtain CD-burning software and use the contents of the c:\
reburn_image folder to generate the bootable CD.
10. After you create the CD, do one of the following:
■ If you are installing Windows remotely using the Floppy Disk Remote
method, proceed to Chapter 5 to setup your remote console.
■ To begin installing Windows Server 2003 using the Floppy Disk Local method,
proceed to Chapter 6.
▼ To Create a Reburn Windows Server 2003 Media
CD Manually on a Linux or Solaris System
1. On a Solaris x86, Solaris OS (SPARC Platform Edition), Red Hat Enterprise
Linux 5, or SLES 10 system, insert the Sun Fire Server Tools and Drivers
CD/DVD into a CD or DVD drive.
2. Log in as root (superuser).
To Next Page
Loading...
