Chapter 9 Incorporate Sun Fire Drivers Into a WIM or RIS Image 67
Before You Begin
Before creating your WIM image, you need to do the following:
■ The Windows Automated Installation Kit (Windows AIK or WAIK) must be
installed. The kit can be downloaded from Microsoft. Sun recommends using
version 2.0 or later of the WAIK.
■ Read the Windows AIK documentation.
■ Windows Remote Installation Services must be are running on a Windows Server.
Read the Windows Deployment Services snap-in documentation.
■ Have the latest Tools and Drivers CD/DVD for your server, see “Download
Server-Specific Driver Packages” on page 7.
Note – All examples below are for a Sun Fire X4150 server with version 2.1.0 of the
Tools and Drivers CD/DVD. For the Sun Fire X4250 and X4450, the same
instructions apply, but file paths on the Tools and Drivers CD/DVD may differ.
▼ To Add Drivers to the WIM Image
1. Copy all of the appropriate files for a 32-bit or 64-bit Windows installation out
of the version folders on the Tools and Drivers CD/DVD to the appropriate
folder structure on a network share. See Step a and Step b below:
a. Identify the appropriate version files.
The following examples are from the Sun Fire X4150 Server Tools and Drivers
CD/DVD, depending on your server model, the file paths may differ. In the
examples below, cdromdrive is the driver letter of the CD/DVD drive that
contains the Tools and Drivers CD/DVD:
Tools & Drivers CD/DVD Windows Server 2003 32-bit files:
cdromdrive:\drivers\windows\Chipset\win2003
...\Chipset\win2003\SP
...\Chipset\AHCI\2003_32
...\Display\2003_32
...\RAID\LSI\2003_32
...\RAID\StorageTEK\2003
...\TPM\2003_32\TPM_Driver
...\IntelNIC\PROXGB\Win32
...\InetlNIC\PRO1000\Win32
To Next Page
Loading...
